Heat Shrink Cable End Cap
Category:Shrink Products

PRODUCTS

Heat Shrink Cable End Cap

  • VSL-HSPE06 is recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheets. Definitive recovery with the layer of spiral coated hot melt adhesive.

  • Resistant to fluids, solvents and UV radiation

    Shrink ratio: 3:1

    Protects power cables up to 1000 V and telecommunication cables

    Very easy installation over the cable end

    Environment definitive watertight seal

    Effectively offering protection against oxidation, ozone, UV-radiation

    Optional adhesive liner provides complete environmental protection and insulation

    RoHS compliant

    Operatingtemperature Minimum shrinktemperature Minimum full recoverytemperature
    -55°C to +110°C 80°C 120 °C

    Standard Color: Black.

  • Property Test Method Typical Data
    Physical Tensile Strength ASTM D 2671 ≥12Mpa
    Elongation ASTM D 2671 ≥200%
    Heat Shock ASTM D 26714hrs at 225°C ≥100%
    Specific Gravity ASTM D 792 1.1g/cm3
    Electrical Dielectric Strength IEC 60243 ≥12 kV/mm
    Volume Resistivity IEC 93 ≥1014ΩNaN
    Chemical Water Absorption ISO62 ≤0.15%
  • Size As Supplied (mm) After Recovery(mm) Cable Diameter(mm)
    D(Min) D(Max) A (±10%) L (±10%) D (±5%)
    Standard length end caps
    12/4 12 4.0 15 40 2.6 4-10
    14/5 14 5.0 18 42 2.2 5-12
    20/6 20 6.0 25 55 2.5 6-16
    25/8.5 25 8.5 30 65 2.5 10-20
    35/16 35 16.0 35 83 3.3 17-30
    40/15 40 15.0 40 75 3.3 18-32
    55/26 55 26.0 50 105 3.5 28-48
    75/36 75 36.0 55 115 4.2 45-68
    100/52 100 52.0 70 130 4.0 55-90
    120/60 120 60.0 70 150 4.2 65-110
    145/60 145 60.0 70 150 4.2 70-130
    160/82 160 82.0 70 133 4.5 90-150
    200/90 200 90.0 70 145 4.5 100-180
    Extended length end cap
    14/5 14 5.0 30 55 2.2 5-12
    45/15 45 15.0 40 110 3.3 18-34
    55/24 55 23.0 70 140 3.8 25-48
    62/24 62 23.0 70 140 3.8 25-55
    75/32 75 32.0 70 150 4.0 40-68
    75/36 75 36.0 70 170 4.2 45-68
    105/45 105 45.0 65 150 4.0 50-90

    Note:Printing, special sizes or colors available on request.

Enquiry

If you have special specification , please feel free to  inform us below:

APPLICATION