Yellow & Green Heat Shrink Polyolefin Tubing
Category:Shrink Products

PRODUCTS

Yellow & Green Heat Shrink Polyolefin Tubing

  • VSL-HSPE02 is made from excellent yellow, green polyethylene material by special technique. Used to identify electrical grounding as well as protecting and insulating wires harnesses of light cabling and easy to mark for additional identification. So the heat shrink is applied to wire or cable middle earth wire marks, special wire cable or conduit marks etc.

  • Dual colors

    Meets UL 224

    RoHS compliant, REACH

    Operatingtemperature Minimum shrinktemperature Minimum full recoverytemperature
    -55°C to +125°C 70°C 120 °C

    Standard Color: Yellow & Green Striped.

  • Property Test Method Typical Data
     Physical Tensile Strength ASTM D 2671 ≥14Mpa
    Elongation ASTM D 2671 ≥500%
    Longitudinal Shrinkage UL 224 ≤5%
    Tensile Strength after Heat Aging UL 224 168hrs at 158°C ≥12Mpa
    Elongation after Heat Aging UL 224 168hrs at 158°C ≥300%
    Heat Shock UL 224 4hrs at 250°C No Dripping, No Cracking
    Specific Gravity ASTM D 792 1.3 g/cm3
    Low Temperature Flexibility UL 224 1hrs at -30°C No cracking
    Flammability VW-1 Pass
    Electrical Dielectric Strength IEC 243 ≥20 kV/mm
    Volume Resistivity IEC 93 ≥1014ΩNaN
     Chemical Corrosion Resistance UL 224 168hrs at 158°C Pass
    Copper Stability UL 224 168hrs at 158°C Pass
    Water Absorption ASTM D 570 ≤0.15%

  • Size As Supplied(mm) After Recovery(mm) Shape Packing Options
    INCH MM I.D.(Min) I.D.(Max) W.T.(Min) M/Reel M/PC
    Ratio: 2:1
    1/16 1.0 1.2 0.65 0.18 Round 200 1.22
    — 1.5 1.7 0.85 0.22 Round 200 1.22
    3/32 2.0 2.2 1.00 0.30 Round 200 1.22
    — 2.5 2.7 1.30 0.30 Round 200 1.22
    1/8 3.0 3.1 1.50 0.30 Round 200 1.22
    — 3.5 3.6 1.80 0.32 Round 200 1.22
    — 4.0 4.1 2.00 0.35 Round 200 1.22
    3/16 4.5 4.6 2.30 0.40 Round 100 1.22
    — 5.0 5.1 2.5 0.45 Round 100 1.22
    1/4 6.0 6.1 3.0 0.45 Round 100 1.22
    — 7.0 7.1 3.5 0.45 Flat 100 1.22
    — 8.0 8.0 4.0 0.50 Flat 100 1.22
    3/8 9.0 9.0 4.5 0.50 Flat 100 1.22
    — 10.0 10.0 5.0 0.50 Flat 100 1.22
    1/2 12 12.0 6.0 0.55 Flat 100 1.22
    — 13 13.0 6.5 0.55 Flat 100 1.22
    — 14 14.0 7.0 0.60 Flat 100 1.22
    — 15 14.9 7.5 0.65 Flat 100 1.22
    — 16 15.9 8.0 0.65 Flat 100 1.22
    3/4 18 18.3 9.0 0.65 Flat 100 1.22
    4/5 20 20.3 10.0 0.67 Flat 100 1.22
    — 22 22.3 11.0 0.67 Flat 100 1.22
    1 25 25.3 12.5 0.85 Flat 50 1.22
    — 28 28.3 14.0 0.85 Flat 50 1.22
    1-1/4 30 30.8 15.0 0.90 Flat 50 1.22
    — 35 35.8 17.5 1.00 Flat 50 1.22
    1-1/2 40 40.8 20.0 1.05 Flat 50 1.22
    2 50 50.3 25.0 1.05 Flat 25 1.22
    Ratio: 3:1
    1/8 3.2 3.2 1.0 0.45 Round 200 1.22
    3/16 4.8 4.8 1.5 0.50 Round 100 1.22
    1/4 6.4 6.4 2.0 0.55 Round 100 1.22
    3/8 9.5 9.5 3.0 0.65 Flat 50 1.22
    1/2 12.7 12.7 4.0 0.75 Flat 50 1.22
    3/4 19.1 19.1 6.0 0.90 Flat 50 1.22
    1 25.4 25.4 8.0 1.05 Flat 50 1.22
    1-1/2 39 39.0 13 1.20 Flat 50 1.22

    Note: Special sizes available on request.

Enquiry

If you have special specification , please feel free to  inform us below:

APPLICATION

VSL-HSPE02