Silicone Rubber Cold Shrink Tube-VANSLIN

Silicone Rubber Cold Shrink Tube

Category:Shrink Products



PRODUCTS

VSL-CS03 is a series open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. The core is removed after the tube has been positioned for installation over an in line connection, or termination lug, etc.; allowing the tube to shrink and form a waterproof seal. The insulation tube is made of silicone rubber, which contains no chlorides or sulfurs. It retains its resiliency and pressure even after prolonged years of aging and exposure. These sizes will cover a range of 1000 volt cables, cooper and aluminum conductors.
Simple installation requires only workman’s hands, No torches or heat required

Accommodates a wide range of cable sizes

Seals tight, retains its resiliency and pressure even after prolonged years of aging and exposure

Excellent wet electrical properties

Resists fungus, acids, alkalis, ozone and ultraviolet light

Waterproof, Flame retardant

For Telecom Coaxial Cable Joint Application

Size(mm)	Removable Core- I.D.(mm)-	As supplied tube length(mm)-Min	Relaxed tube length (mm)	Range of Sealing Part Min- Max (mm)
28/6	28	90	120	6-23
40/10-A	40	115	135	10.5-34
40/10-B	40	125	145	10.5-34
45/12-A	45	170	190	13.5-39
45/12-B	45	230	250	13.5-39

For Cable Termination &Joints Application

Size(mm)	Removable Core- I.D.(mm)-	As supplied tube length(mm)-Min	As supplied tube thickness (mm)-Min	Range of Sealing Part Min- Max (mm)
20	20	80~500	1.8	10-14
28	28	80~500	1.8	12-17
32	32	80~500	1.8	14-21
35	35	80~500	1.8	19-28
40	40	80~500	1.8	21-31
47	47	80~500	1.8	25-37
53	53	80~500	1.8	31-45
65	65	80~500	2.8	31-45
70	70	80~500	2.8	37-55
80	80	80~500	2.8	44-65
88	88	80~500	2.8	44-65
104	104	80~500	2.8	51-76
110A	110	80~500	2.8	45-66
110B	110	80~500	2.8	72-105
150	150	80~500	2.8	92-135

Note: Special sizes and length available on request.

If you have special specification , please feel free to inform us below: