PRODUCTS
Heat Shrink Cable End Cap
Category:Cold Shrink Tube
APPLICATION
VSL-HSPE06 is recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheets. Definitive recovery with the layer of spiral coated hot melt adhesive.
Resistant to fluids, solvents and UV radiation
Shrink ratio: 3:1
Protects power cables up to 1000 V and telecommunication cables
Very easy installation over the cable end
Environment definitive watertight seal
Effectively offering protection against oxidation, ozone, UV-radiation
Optional adhesive liner provides complete environmental protection and insulation
RoHS compliant
Operatingtemperature Minimum shrinktemperature Minimum full recoverytemperature -55°C to +110°C 80°C 120 °C Standard Color: Black.
Property Test Method Typical Data Physical Tensile Strength ASTM D 2671 ≥12Mpa Elongation ASTM D 2671 ≥200% Heat Shock ASTM D 26714hrs at 225°C ≥100% Specific Gravity ASTM D 792 1.1g/cm3 Electrical Dielectric Strength IEC 60243 ≥12 kV/mm Volume Resistivity IEC 93 ≥1014ΩNaN Chemical Water Absorption ISO62 ≤0.15% Size As Supplied (mm) After Recovery(mm) Cable Diameter(mm) D(Min) D(Max) A (±10%) L (±10%) D (±5%) Standard length end caps 12/4 12 4.0 15 40 2.6 4-10 14/5 14 5.0 18 42 2.2 5-12 20/6 20 6.0 25 55 2.5 6-16 25/8.5 25 8.5 30 65 2.5 10-20 35/16 35 16.0 35 83 3.3 17-30 40/15 40 15.0 40 75 3.3 18-32 55/26 55 26.0 50 105 3.5 28-48 75/36 75 36.0 55 115 4.2 45-68 100/52 100 52.0 70 130 4.0 55-90 120/60 120 60.0 70 150 4.2 65-110 145/60 145 60.0 70 150 4.2 70-130 160/82 160 82.0 70 133 4.5 90-150 200/90 200 90.0 70 145 4.5 100-180 Extended length end cap 14/5 14 5.0 30 55 2.2 5-12 45/15 45 15.0 40 110 3.3 18-34 55/24 55 23.0 70 140 3.8 25-48 62/24 62 23.0 70 140 3.8 25-55 75/32 75 32.0 70 150 4.0 40-68 75/36 75 36.0 70 170 4.2 45-68 105/45 105 45.0 65 150 4.0 50-90 Note:Printing, special sizes or colors available on request.